Production process of resin crafts
1、 Preparation
Prepare a rod scale (5kg scale), seasoning bucket (or plastic basin), mixing rice (or bamboo chopsticks), small spoon (plastic, aluminum, porcelain spoon can be used)
2、 Mixture
According to the size of the mold and the quantity of the product, the unsaturated resin is weighed out and poured into the seasoning barrel, and then the curing agent is added according to the proportion of (accelerator). First, the curing agent is added into the unsaturated resin, which is fully stirred, and then the accelerator is added Stir, fully mix, add dilution, (also stir) and then add material according to the required color. (the amount of pigment can be added or subtracted according to different varieties until it reaches the required level, generally large amount of pigment can be used). When adding pigment, remove the pigment with resin, stir it inside, pour it into the material barrel after uniformity, and then fully stir it. The bottom material is stirred Add after mixing, add with mixing, until the required degree. (the prepared mixture slurry should be viscous, so that it can flow slowly when it falls down)
3、 Inverted model
The mold should be square and flat, (horizontal state) the mold surface should be cleaned, so that it can be poured. When pouring, use a small spoon to scoop the slurry and pour it slowly one by one. Do not pour it. Pour it from the * * high point to make it flow naturally. In this way, the bubbles can be squeezed away. Otherwise, there will be pores after the finished product. Note that when pouring into the mold, it should not overflow the mold periphery. After pouring out the periphery, it should be cleaned and eradicated immediately, otherwise it needs to be processed and polished again after molding. The slurry can be solidified after 1-2 hours and demoulded after solidification.   
 
Production method of resin crafts
The production method of unsaturated resin handicraft is characterized in that it includes the following steps:
(1) According to the modeling of resin crafts, the mold is made of silicone rubber
(2) Adding proper amount of filler into unsaturated resin and stirring evenly
(3) Before pouring into the mold, the curing agent and accelerator were added into the unsaturated resin, and then poured into the mold after stirring evenly.
(4) After the resin is cured and demoulded, the handicraft with the required shape can be obtained. It can cast all kinds of simulation handicrafts under normal temperature, and its solid shape is fast
Speed, realistic details, simple process.